Hamilton Cams 110# Valve Springs for 24V and CR Cummins

Hamilton Cams 110# Valve Springs for 24V and CR Cummins
Stock 24v springs allow the intake valve to blow open at 52psi on the bench, 60lb 12v springs at 34psi. This is a major problem and it is intensified as temperatures and rpm increase. With high drive pressures your engine might even be experiencing reversion, when the exhaust valve blows open on the intake stroke contaminating the intake charge. Get control of your valvetrain with our springs and pushrods.

Our 24 valve springs are designed to work with your factory retainers and locks, and have a Beehive design to reduce mass on the end with most linear motion. They also help increase initial acceleration of the valve. They are made with the highest quality ovate wire to handle cams with higher lift. They coil bind .111” after the stock springs, and have been triple shot-peened and nitrided to reduce internal stresses, prolong life and prevent corrosion.

Made in the USA from only the best materials. The BEST springs on the market at an affordable price. No one size fits all approach. These are not Honda springs or 4.6l ford springs. They were designed for just this application. Use our 110# springs for street and competition up to 5000 RPM. Use our 140# springs on competition engines exceeding 5000 rpm or engines with longer valves or roller profiles. Item #DD-HAM-9807-110

Price $399.00