Industrial Injection Silver Series PhatShaft Turbo for 5.9 & 6.7

Industrial Injection Silver Series PhatShaft Turbo for 5.9 & 6.7
The Silver Series PhatShaft is available is 3 different compressor sizes: 62mm, 64mm and 66mm; all three have extended tip technology.

What sets the Silver Series PhatShaft apart from the Original and Super PhatShaft is the large 74mm turbine wheel, modified exhaust housing and polished compressor housing. The 74mm turbine wheel provides the transfers more exhaust gas energy than any other wheel in the lineup; resulting in the lowest EGT's and highest top end horsepower.

The most important benefit to the 74mm turbine wheel is the limination of turbo surge an the broadening of the power range. This greatly reduces the risk of turbo damage.

Head studs and upgraded valve springs are HIGHLY recommended when going to this turbo, as boost pressures can easily reach above 60 psi.

All PhatShaft turbos are equipped with with dual groove bearings are adjustable boost elbows. The Silver Series also uses 360 degree sintered metal trhust bearings for maximum durability.

The Super PhatShaft series is designed for trucks with multiple fueling upgrades, tows larger loads or likes the frequent the track.

Supports 350 - 800 HP depending on application. These turbos are well suited to heavy abuse and hard track use.

An HX40 downpipe is required when using the PhatShaft line of turbos.

Please select your turbo from the options below.

2nd Gen 12V and 24V trucks
(1) SSPS 62/74/14: 350 - 550 HP
(2) SSPS 64/74/14: 350 - 650 HP
(3) SSPS 66/74/14: 350 - 700 HP

3rd Gen CR trucks
(4) SSPS 62/74/14: 350 - 600 HP
(5) SSPS 64/74/14: 400 - 700 HP
(6) SSPS 66/74/14: 400 - 800 HP

3rd Gen 6.7L trucks
(7) SSPS 62/74/14: 400 - 600 HP
(8) SSPS 64/74/14: 500 - 675 HP
(9) SSPS 66/74/14: 500 - 750 HP Item #DD-IIS-9411-SSP

Select Turbo Model from list above
Select Down Pipe

Price $1795.00